This HP Corse spacer kit allows you to fit the HP Corse silencer with the original cases of your Royal Enfield HIMILAYAN 450 motorbike. It offsets the original straight case support.

Closed handrail

Overmoulded steel bar in various colours

Anticorodal arm for attaching the handguard to the handlebars, with dedicated bracket

Bi-injection cover

Mounting kit INCLUDED

Use a standard handlebar with an extra ring and an extra bracket

The Acerbis kit includes everything you need for correct mounting

Weight: 1 kg

SHAD 3P mount for Terra Adventure TR40 & TR30 panniers

FITS WITH

TERRA ADVENTURE TR40 PANNIERS (X0TR401)

SHAD TERRA ADVENTURE TR30 (X0TR30) WATERPROOF BAGS

Mounting plate for top case. This stainless steel bracket has been specially designed to fit your Royal Enfield Himalayan 450.

It provides a versatile solution for attaching the top case to the rear rack or for use as a stand-alone luggage platform.

It comes with additional anchoring points for secure attachment and has a maximum load capacity of 5 kg, guaranteeing durability and practicality.

A sturdy aluminium top case with a capacity of 40L, it's the perfect complement to the style and adventurous spirit of the Himalayan. With its thick-walled aluminium structure. This luggage has ABS corner protection and a load capacity of 5 kg. It has been designed for easy removal without the need for tools, and features an anti-theft mechanism with a lockable lid. This case is water-resistant. You can add the Adventure inner bag (KXA00294) for a totally waterproof solution.

Also available in black. (KXA00420)

Must be installed with its top case support (KXA00434).

GPS support frame for Royal Enfield Himalayan 450.

Includes a 12 mm diameter bar for mounting the GPS bracket + 2 slots for a 29 mm diameter 12v or USB socket (not supplied).

Colour: matt black

No holes to drill, supplied with screws and bolts

The bubble moves forwards and the tilt is adjustable

Side stand extension for Royal Enfield Himalayan 450

By extending the ground contact surface of your side stand, you'll prevent it from sinking into the ground and causing your motorbike to fall.

Construction: aluminium

Fitting: fits directly onto the original stand foot

The extension is 20mm thick to compensate for the short length of the stand.

Supplied with a silent block to limit the stand's travel (prevents the centre and side stands from banging against each other, see last 2 photos).

Handlebar extensions +25mm for Royal Enfield Himalayan 450

Manufacture: aluminium

Designed to fit over aluminium panniers, these waterproof wheeled bags ensure your items are protected from the rain.

 There's also a strap that doubles as a carrying handle and features the Royal Enfield logo on both sides.

WATERPROOF INNER BAGS FOR HIMALAYAN 410/450 ALUMINIUM (1990200) AND BLACK ALUMINIUM (1990230) HARD CASES

Protects against impact, abrasion, mud, sand and debris.

Right-hand side: clutch housing, water pump and lower pan protection

Left side: ignition housing protection

High-temperature resistant, with numerous openings to prevent overheating

Can be applied with the original screws, adhering perfectly to the clutch/ignition housing.

Compatible with Acerbis skid plates

Weight: 555g

GPS support frame for Royal Enfield Himalayan 450.

Includes a 12 mm diameter bar for mounting the GPS bracket + 2 slots for a 29 mm diameter 12v or USB socket (not supplied).

Colour: matt black

No holes to drill, supplied with screws and bolts

The bubble moves forwards and the tilt is adjustable

Protection de radiateur en aluminium estampé Royal Enfield. Spécialement conçue pour compléter votre Royal Enfield Himalayan 450, maintient l'efficacité du refroidissement tout en offrant une meilleure protection du radiateur.

Sa finition brossée et son logo gravé au laser ajoutent une touche unique à votre Himalayan 450.

GPS support frame for Royal Enfield Himalayan 450.

Includes a 12 mm diameter bar for mounting the GPS bracket + 2 slots for a 29 mm diameter 12v or USB socket (not supplied).

Colour: matt black

No holes to drill, supplied with screws and bolts

The bubble moves forwards and the tilt is adjustable

ULTRA REINFORCED FRONT AND REAR INNER TUBE KIT UHD 4MM.

A saddle for the passenger who wants to spend long days on the road without complaining too much, this saddle, specially designed to complement your Royal Enfield Himalayan 450, features top-of-the-range materials and a high-comfort foam interior to enhance long stages of riding.

This touring windscreen offers better protection against the wind when you're out and about.

It has a scratch-resistant coating and is compatible with Rally handguards and handlebars,

to give you a complete riding solution.

HIMALAYAN HAND PROTECTOR 450 (KXA00426)

Add a layer of protection to key areas of the engine without compromising style or ground clearance. The compact engine guard is minimally styled but structurally designed to protect the engine crankcases from static drops. It is made from 22.2mm mild steel tubing and has a double black coating to match the chassis frame for corrosion resistance. This engine guard is a subtle but valuable addition to protect your motorbike.

Saddle for riders who spend long days on the road. This saddle is specially designed to complement your Royal Enfield Himalayan 450. It's made from top-of-the-range materials and modified interior comfort foam to enhance long rides.

Passenger seat ref: (KXA00428)

Rally handguards specific for Royal Enfield Himalayan 450, are equipped with a two-point mounting system with a solid aluminum bar for maximum protection of the rider's hands and the levers from the bike. The handguard kit contains the mounting material without the need to modify the original handlebar.

 They are compatible with the larger Adventure screen and the Rally handlebar

ADVENTURE 450 HIMALAYAN WINDSCREEN (KXA00425)

Rally saddle for the Himalayan 450 and Rally mudguard kit (sold separately) make up a set designed to be fitted together. 

The bike's styling changes radically. 

With the kit, the seat height increases by 34 mm and is narrower, making it easier to stand on the footrests.

Rally himalayan 450 fender kit (KXA00410)

Central connector, for removing the original silence box (ONLY FOR NON-COMPENSATION RACES)

- Made from high-quality, hand-brushed stainless steel

- Hand-made TIG welds

- Calibrated fittings for maximum precision

- Remarkable weight saving compared to standard equipment -83% (OEM centre pipe 3.2 Kg vs Hp Corse 0.55 Kg)

- Fits the original Royal Enfield silencer

- This product does not meet emissions compliance requirements for road use (for competition use only).

Latest-generation skid plate that glides smoothly over natural obstacles (hops, rocks, logs) for a smooth ride.

Provides maximum protection for the frame and engine.

Extended protection zones on the side covers, water pump and footrest frame areas.

Exhaust zones for greater lightness, ventilation and ease of cleaning inside the skid plate.

Designed to reduce the ingress of mud and debris

Compatible with simultaneous use of Acerbis X-Power (ignition and clutch cover protection)

Easily installed with the ACERBIS KIT

Weight: 1050g

Simple two-point mounting without special tools

Motorcycle-specific aluminium bar with high-quality epoxy finish

Effective protection for handlebar controls in the event of a fall

Adventure shells in impact-resistant plastic protect against bad weather, branches and stone chips.

Elegant, aerodynamic design, matt black finish.

Extra protection with the PROTECTIVE SKID SET, available separately

Extra protection against the elements with the separately available EXTENSION SET

Included

1 x Mounting kit for hand protectors

1 x Set of Adventure handguard shells

Installation instructions

Fitting material

Details

Material: Plastic / Aluminium

Colour: black / black

Total weight: ca. 1.4 kg

- Material: Hand-brushed stainless steel

- Hand TIG welding

- Calibrated fittings

- Also suitable for the original Royal Enfield silencer

- Only for racing parts, not homologated

The engine protection bars, specially designed to fit your Royal Enfield Himalayan 450, are made from steel and offer a wide opening and a reinforced rear section anchored to the frame, perfectly complementing the original crankcase protection.

Pair of Royal Enfield aluminium side-case supports.

Specially designed to fit your Royal Enfield Himalayan 450.

Made from 18mm black epoxy painted steel tubing to ensure durability in all conditions.

Aluminium cases are sold separately, allowing you to customise the configuration to suit your needs.

Aluminium cases ( 1990200 )

Black cases ( 1990230 )

The Rally fender kit for the Himalayan 450 and the Rally seat (sold separately) make up a kit designed to be mounted together. With their more compact design, the style of the motorcycle changes radically.

By assembling the entire kit, the seat height increases by 34 mm and becomes narrower, making it easier to ride standing on the footpegs.

Rally himalayan 450 saddle (KXA00405)

SHAD TERRA ADVENTURE TR30 WATERPROOF BAGS.

MOUNTS WITH

SHAD 3P HIMALAYAN 450 BINDING (R0HM44IF )

Oversized 23-litre tank.

Designed to maintain an ergonomic profile and give your bike a unique look, combining practicality and style.

Perfect for all off-road outings, whether for competition or touring.

Offers strength and lightness, thanks to the use of polyethylene, which offers the best compromise.

Approved for road use in the EU (E800042Z) compatible with E5 E10 fuel.

Includes

- Acerbis cap

- Vent pipe

- Assembly kit

Tank uses original pump and level switch

Compatible with most tubular motor covers

3.2 kg / 7 lbs

The SP-1 SHORT silencer combines technology and power in just 300 mm. The oval body is made from high-quality, ultra-light stainless steel, with the HP Corse logo laser-engraved on it. The exhaust features tapered tips, a seamless outlet boss obtained through a refined process and a stainless steel connector enhanced by a polished carbon cover. Euro 5 approved with the rest of the original line of your ROYAL ENFIELD HIMALAYAN 450 motorbike. Fitting instructions included.

N.B. The REHI45-C PRIMARY COLLECTOR and the REHI45-D CENTRAL CONNECTOR are optional and not compulsory.

Fitting the HP Corse exhaust to the original Royal Enfield case mounts is simple and hassle-free thanks to the REHI45-V specific spacer kit, sold separately.

- Oval stainless steel body with black finish

- 0.8 mm thick/300 mm long case

- Moulded oval bottoms

- High-quality soundproofing material

- Hand-welded stainless steel bracket

- Waterproof rivets

- Laser-engraved HP Corse logo

- Weight 2.158 gr.

- Street Legal’ approved - Euro 5

A sturdy black aluminium top case with a capacity of 40L, it's the perfect complement to the himalayan's style and spirit of adventure. With its thick-walled aluminium structure. This luggage has ABS corner protection and a load capacity of 5 kg. It has been designed for easy removal without the need for tools, and features an anti-theft mechanism with a lockable lid. This case is water-resistant. You can add the Adventure inner bag, ref: (KXA00294) for a totally waterproof solution.

Also available in grey aluminium ref: (KXA00433)

must be installed with its top case support ref: (KXA00434)

The SP-1 SHORT silencer combines technology and power in just 300 mm. The oval body is made from high-quality, ultra-light stainless steel, with the HP Corse logo laser-engraved on it. The exhaust features tapered tips, a seamless outlet boss obtained through a refined process and a stainless steel connector enhanced by a polished carbon cover. Euro 5 approved with the rest of the original line of your ROYAL ENFIELD HIMALAYAN 450 motorbike. Fitting instructions included.

N.B. The REHI45-C PRIMARY COLLECTOR and the REHI45-D CENTRAL CONNECTOR are optional and not compulsory.

Fitting the HP Corse exhaust to the original Royal Enfield case mounts is simple and hassle-free thanks to the REHI45-V specific spacer kit, sold separately.

- Oval stainless steel body with black finish

- 0.8 mm thick/300 mm long case

- Moulded oval bottoms

- High-quality soundproofing material

- Hand-welded stainless steel bracket

- Waterproof rivets

- Laser-engraved HP Corse logo

- Weight 2.158 gr.

- Street Legal’ approved - Euro 5

Forkhead for Himalayan 450

Made from aluminium, powder-coated in black.

12mm bar

Turn indicators included

Slot for original speedo

Slots for USB / Extra switch

Not compatible with original crash bars

Electrical harness: requires replacement of original connector (new connector supplied)

Lighting type :

-LED Road approved: 2x7w low beam and 2x14w high beam (Approved for RHD + LHD, ECE + DOT)

HIMALAYAN 410/450 ALUMINIUM BLACK 26-LITRE HARD-SIDED SUITCASES

CAN BE FITTED WITH WATERPROOF INNER BAGS: 1990252

Fixing kit available separately: 1990259